RTU5023 GSM Power Failure Alarm automatically sends an SMS alert when mains power fails and another notification when power is restored. The built-in Li-Ion battery provides up to approximately 8 hours of backup operation.
The device also supports temperature, humidity and voltage monitoring. SMS alerts can be sent when the measured values exceed the configured limits.
RTU5023 GSM Power Failure Alarm is designed to monitor the electrical power supply and automatically notify you by SMS when the power fails or is restored.
The device is suitable for monitoring homes, offices, workshops, servers, heating systems, refrigeration equipment and other locations where a power failure notification is important.
When the external power supply is interrupted, the RTU5023 automatically sends an SMS notification to the configured phone numbers. When the power supply is restored, another SMS notification can be sent.
The built-in 900 mAh Li-Ion backup battery allows the device to continue operating for approximately 8 hours after the external power supply is disconnected.
The RTU5023 can also be used for temperature and humidity monitoring. Alarm limits can be configured for the connected sensor. If the measured value exceeds the configured limit, the device can send an SMS alert.
The device can monitor the voltage of the power supply and send an SMS notification when the voltage falls below or rises above the configured limits.
The RTU5023 can be configured using SMS commands. Up to 10 authorized phone numbers can be configured for receiving alarm notifications.
The built-in Li-Ion battery provides backup power when the external power supply is interrupted. Battery operating time is approximately 8 hours, depending on the operating conditions and connected sensors.
For information about setup, configuration and the available monitoring functions, please see the instructions supplied with the device.
You might also like