Nastavení RTU 5023 GSM alarm napájení, teploty a vlhkosti

<a href="https://pchlavka.cz/1-gsm-sms-power-alarm-zarizeni-posle-sms-pri-ztrate-napajeni-baterie-na-8-hodin-operozu-monitoring- temperature-and-humidity.html" target="_blank" class="ext" rel="noreferrer noopener">CAN BE PURCHASED HERE .....................< /a>

Function description - monitoring of power supply, temperature and humidity
The device will send an sms when there is a power failure, the device is backed up by a battery so that it can send notifications without power. Furthermore, the device can be set to that if the sensor detects a value outside the set range (temperature or humidity, it will send an SMS)

Need to charge.................2-8 hours

For example, we have a set range of -5 to +19 °C, the device will send an sms at -4 °C and 20 °C etc

Instructions:
Insert the green patch panel into the RTU5023 base unit Connect the cables to the green patch panel (view from top left to right)

power supply
red power cable +
black power cable -

sensor
white GND cable
black Data cable
red VCC cable

Some sensors are tested - then the cables to the sensor are connected - it happened that the sensors did not seem to work, but it was the contact
Please charge the internal battery (12-24 hours) before testing

white GND cable
black Data cable
red VCC cable (sometimes it happens that one of the three contacts does not connect and the module reports zero values)

Example.. Armed Temp:00.0C Normal Humi:00RH% Normal Volt:12.4VDC Normal

<img alt="" src="http://servishlavka.cz/sites/default/files/images/2018-06-11%2011_26_14-GSM%20SMS%20Power%20Alarm%20Za%C5%99% Battery %20na%208%20hodin%20.jpg" style="width: 250px; height: 139px;" />
Unscrew the back cover and insert the SIM card (format <a href="https://www.o2.cz/osobni/casto-kladene-otazky/434455-faq_11.html" target="_blank" class="ext" rel="noreferrer noopener">minisim</a>, <a href="https://www.google.com/search?q=how+to+disable+pin& ie=utf-8&oe=utf-8&client=firefox-b" target="_blank" class="ext" rel="noreferrer noopener">pin disabled</a>)
Screw the antenna and turn the Power Switch under the SIM card to the right position.
<a href="http://servishlavka.cz/kh/sites/default/files/sim_1.png"><img alt="" src="http://servishlavka.cz/kh/sites/ default/files/sim_1.png" style="width: 600px; height: 314px;" /></a>
Connect the adapter to the electrical socket. network 220 V

<div dir="ltr">GSM LED indicator LED flashing for 0.8 seconds (fast): registration to GSM network. (after about 10 s the device should register to the GSM network)</div>
<div dir="ltr">LED Flashing about 3 seconds : normal status of the GSM network. LED off: Unable to connect to SIM card or not registered to mobile network</div>

<h2>Next, the device is set up using SMS - we send an SMS from our phone to the SIM card in the device</h2>
Time setting 1234D2018-06-11T10:09# 
(we will edit the sms according to the current time 2018 year, 06 month, 11 day of the month, 10 hour, 09 minute)

Mobile phone authorization (phone is 776190060 - example, messages will be sent to this phone) 1234A01T776190060
Who didn't get it 776190060 = Your mobile number

Authorization of a mobile phone with an international prefix, we add two zeros before 420, i.e. 00420 (the phone is 776190060 - example, messages will be sent to this phone) 1234A01T00420776190060

Authorization of another mobile phone (the phone is 776190061 - example, messages will be sent to this phone) 1234A02T776190061
etc...

Restart after 12 hours 
1234REBOOT12

Restart manual
1234RT

For notifications in the event of a power failure, nothing further needs to be set ............................................ 
Sends an sms when the power is turned off (after about 80 seconds without power)
Volt:00.0VDC Lower

Sends sms when power is restored
Volt: 12.5VDC Normal

Sends status after ringing from an authorized number

Armed Temp:24.3C Normal Humi:68RH% Normal Volt:12.5VDC Normal GSM Signal Value:21 Imei:869103024282941

Setting the temperature range
1234AINR1L-050H260# Sends a message if the temperature is less than -5 C and greater than 26 C

Setting the humidity range
1234AINR2L005H098# Sends a message if the humidity is less than 5% and greater than 98%

Set voltage range
1234AINR3L080H130# Sends a message if the voltage is less than 8V and greater than 13V

Turn off the daily report (if you don't want to send the status every day - report is sent by rtu5023 in the basic setting - if you don't want the daily report, send an sms below )
1234DRTDEL 
Reset (setting default values)
1234RESET

Turn off messaging
1234BB

Alarms yes - will send messages
1234AA

Default password is 1234 Change password command 1234P6666 (Change password 1234 to 6666)

Other settings 1234DT001 Send status every hour 1234DT008 Send status every 8 hours etc..

Deletion of the number in the 3rd position
1234DA03T00420776190060

List of all authorized numbers 1234A03T008613570810254



set the time according to the operator
1234TEL00420776190060#
 
 password 1234 tel 776190060 area code 00420

In case of problems, reset the device .... factory reset the device 
<div dir="ltr">Reset the device - Slider to the OFF position - press the reset button under the sim card and hold - slider to the ON position - release the reset button after 10 seconds </div>
<div dir="ltr">After the reset, the device is set to basic settings</div>


For individual settings or consultation, you can write to <a href="mailto:info@pchlavka.cz?subject=nastaven%C3%AD%205023" class="mailto">info@pchlavka.cz</a > Or call tel. 776190060

<a href="https://pchlavka.cz/1-gsm-sms-power-alarm-zarizeni-posle-sms-pri-ztrate-napajeni-baterie-na-8-hodin-operozu-monitoring- temperatures-and-humidity.html" target="_blank" class="ext" rel="noreferrer noopener">Link to the product https://www.pchlavka.cz/posle-SMS-po-ztrate-napajeni</a >